MyPhone

== myPhone is a TuxPhone ==

The TuxPhone proved the basic concept of a completely open phone (COP) with open software and open hardware, with all specifications of all the components freely available.

Software

See the open mobile software page.

OpenCell

OpenCell is being built by a team at Florida Tech, and we are sharing ideas and encouragement. They have published circuit schematics.

myPhone can be built from the following components, in any combination, landscape or portrait oriented screen.

Case

a customizable case that can be produced on a 3D printer. A first attempt at a bezel and an initial myPhone case for a 4.3" LCD have been designed using Alibre Express and printed at Techshop. A more sophisticated portrait oriented case for a 3.7" LCD has been produced and design files posted.

LCD Touch Screen

Sharp 4.3" 480x272 pixels as used in the Sony PSP, with a Hantouch touchscreen overlay added. This LCD has deeper color resolution than most, a true 8bits/pixel rather than 6bits for many others, but has relatively low pixel resolution. It's a low cost option, that needs more complex interfacing circuitry.

There is also a higher resolution 4.3" at 800x480 with integrated touchscreen that is being investigated.

OpenCell and the portrait oriented myPhone are using a Sharp 3.7" 480x640 pixels which is portrait format with integrated touchscreen and easier power supply integration. Its derived from the Dell Axim 50V PDA screen.

CPU

Gumstix PXA270 600MHz CPU and I/O cards, dimensioned DXF specs

Freescale i.MX31 is another option that includes graphics/multimedia processing, more open documentation than the later models in the PXA series, and will be the basis of a more compact custom design.

GSM Modem and optional GPS

GSMstix - Siemens MC75 GSM/EDGE and ublox Global Positioning System Module or Telit GM862 Module or the Telit GM862-GPS. GSM Antenna. GPS Antenna specification.

Codec

NXP UCB1400 audio CODEC with integrated touch screen controller and power management monitor

WiFi/Bluetooth

Still researching the best options - The Atheros AR6000 is one possibility. Many chipsets do not have open specs. Since they operate on the same frequency, a combined chipset is needed to coordinate transmission, possibly with combined antenna.

Bluetooth keyboard for people who want more than a touchscreen for input.

the Bluetooth Frogpad for one handed typing.

Thinkoutside/iGo makes a Stowaway "universal" Bluetooth folding keyboard.

Accelerometer

Freescale MMA7260QT ?

Brain Wave Reader

Neurosky have been showing some interesting technology...

Camera

It would be nice to have a front mounted camera option for people who want to build video-phones.

Video-out

A TV-compatible video out feature would also be useful for presentations and projectors.

Battery

many options, but one high capacity, low cost, easily available possibility is 51x39x9mm Treo 650/700 3184WW 1800mAh.

A higher capacity option in the Treo form factor is 2400mAh I bought one of the 2400mAh batteries, and its the same size as the 1800mAh. There is a 3200mAh variant that is 3mm deeper.

Work is in progress on this page, capturing all the specifications and URLs. --71.116.75.177 05:14, 22 March 2007 (EDT)

More information about generic hardware avaliable to build other phones is avaliable on the Hardware page - This is also work in progress :-).

Open Microprocessor Module

An Open Microprocessor Module design based on the Freescale i.MX31 has been started, and may serve as the basis for a broad range of potential mobile devices including MyPhone.

Notes about Options

GSM Module

GSMStix

Craig over at GumStix has talked about the GSMStix they're working on. The last I heard it was going to use a Siemens MC75 module. Though I could be wrong. Craig says he likes this family of parts because they have direct digital audio i/o. At 34mm x 45mm it's only a shy bit smaller than the Telit module. But hey, it does EDGE, it's smaller and it has digital audio i/o, and it doesn't use a BGA grid, so it's possible that mere humans could solder them on to their project boards. But... I don't think we've found a reseller who's distributing them in single quantities, and there was a tempest in a teacup about NDAs and so forth. News is the NDA issue was a red herring, they didn't have problems distributing technical docs, but didn't want to talk about pricing without an NDA. For us, that's probably no biggie. Plus, if GumStix builds it into a standard part, they'll make a bulk order and sell them to individuals. So when the GSMStix is released, it'll no-doubt be a cool product that should be quite usable. 'Til then we'll probably have to make due with the Telit modules.

Telit GM862 Family

This is where many of us got our starts. SparkFun sells members of this family in single quantities, along with proto boards. You can find some links to info resources on the SqueakyMoPho Project page.

Telit GE863 Family

So Adrian and I were eyeballing this module after playing around with the GM862. It's listed in the SparkFun catalog, but the last I checked, they were out of stock. And with the release of the GSMStix, it may not be relevant. But, it's smaller than the GM862 family and it looks like it might be easier to attach a smaller antenna to the thing. Telit has a [web site] and GE863 Family Brochure.pdf PDF Brochure about the GE863 family.

LCD Screen

Sharp 4.3 inch screen

We were originally looking at using the Sharp LQ043T3DX02 with a HanTouch touch-screen. This is the same screen that's used in the Sony PSP, so we figured there would be several of them in the supply chain. But surprisingly, we couldn't find a reasonable price for the "official" sharp products, and the device required a couple different voltage levels, so for the time being, we punted on the thing in favor of the 3.7 portrait display below. These displays use a FH12A-40S-0.5SH(55) connector (that's a 40 pin .5mm pitch connector) for the main interface and a 4 pin 0.5 FPC style connector for the backlight. The reference connector for the backlight is the Kyocera 6298. The Hantouch touch-screen recommended is the HT043A-NCOFD52 which uses a for pin FPC type with a 1mm pitch, so something like a BL110-4 should work. There are a few after-market suppliers who say they have "compatible" displays for a way cheap price, and we may buy a couple to experiment with. If it turns out that they work, we may yield to the lure of cheap LCD screens and make the landscape myPhone with this screen.

Sharp 3.7 inch screen

The Sharp LS037V7DW01 is the latest LCD we're thinking of using. We were able to get these displays at about the same price as the PSP displays through official channels, and it's a better display overall, so we're going with it. This display appears to use a single input voltage level and a 51 pin .3mm pitch connector (like a Hirose FH23-51S-0.3SHAW(05)). Which means it will be a total pain in the keester to solder.

800x480 screen

Rumors abound that we can buy the 800x480 screen that Nokia uses in the 770. If we can't find a cheap, reliable source for the PSP display, we may try to track this one down.

Connectors

JAE DD1 Series

The Japan Aviation Electronics [http://www.jae-connector.com/en/general_en.cfm?series_code=DD1