Difference between revisions of "MyPhone"
From HBMobile
Jump to navigationJump to search| Line 2: | Line 2: | ||
| + | The TuxPhone proved the basic concept of a completely open phone (COP) with open software ''and'' open hardware, with all specifications of all the components freely available. | ||
| − | + | ; [http://www.widgetry.org/dokuwiki/doku.php OpenCell] : OpenCell is being built by a team at Florida Tech, and we are sharing ideas and encouragement, but their design is based on a different set of hardware components. | |
| − | myPhone can be built from the following components, in any combination | + | '''myPhone''' can be built from the following components, in any combination |
; Case : a customizable case that can be produced on a 3D printer | ; Case : a customizable case that can be produced on a 3D printer | ||
| Line 17: | Line 18: | ||
; Codec : USB1400 | ; Codec : USB1400 | ||
| − | ; WiFi/Bluetooth | + | ; WiFi/Bluetooth : [http://www.embeddedworks.net/newsite/WLAN/oem_sip_80211g.html Embeddedworks] Infineon Embedded Bluetooth 2 802.11b/g module |
| − | ; Accelerometer | + | ; Accelerometer : Freescale MMA7260QT ? |
; Battery : 1700mAh from [http://www.batteries4less.com/palm-handspring/treo-700w-700wx/treo-700w Treo 700] | ; Battery : 1700mAh from [http://www.batteries4less.com/palm-handspring/treo-700w-700wx/treo-700w Treo 700] | ||
Work is in progress on this page, capturing all the specifications and URLs. --[[User:Adrian|Adrian]] 04:00, 29 January 2007 (EST) | Work is in progress on this page, capturing all the specifications and URLs. --[[User:Adrian|Adrian]] 04:00, 29 January 2007 (EST) | ||
Revision as of 09:23, 29 January 2007
myPhone is a TuxPhone
The TuxPhone proved the basic concept of a completely open phone (COP) with open software and open hardware, with all specifications of all the components freely available.
- OpenCell
- OpenCell is being built by a team at Florida Tech, and we are sharing ideas and encouragement, but their design is based on a different set of hardware components.
myPhone can be built from the following components, in any combination
- Case
- a customizable case that can be produced on a 3D printer
- LCD Touch Screen
- Sharp 4.3" 480x272 pixels as used in the Sony PSP, with a Hantouch touchscreen overlay added.
- CPU
- Gumstix PXA270 CPU and I/O cards, dimensioned DXF specs
- GSM Modem and optional GPS
- GSMstix - Siemens MC75 GSM/EDGE and ublox Global Positioning System Module
- Codec
- USB1400
- WiFi/Bluetooth
- Embeddedworks Infineon Embedded Bluetooth 2 802.11b/g module
- Accelerometer
- Freescale MMA7260QT ?
- Battery
- 1700mAh from Treo 700
Work is in progress on this page, capturing all the specifications and URLs. --Adrian 04:00, 29 January 2007 (EST)
