MyPhone

From HBMobile
Jump to navigationJump to search

myPhone is a TuxPhone

The TuxPhone proved the basic concept of a completely open phone (COP) with open software and open hardware, with all specifications of all the components freely available.

OpenCell
OpenCell is being built by a team at Florida Tech, and we are sharing ideas and encouragement, but their design is based on a different set of hardware components.

myPhone can be built from the following components, in any combination

Case
a customizable case that can be produced on a 3D printer. A first attempt at a bezel and an initial myPhone case have been designed and printed.
LCD Touch Screen
Sharp 4.3" 480x272 pixels as used in the Sony PSP, with a Hantouch touchscreen overlay added.
OpenCell are using a Sharp LS037 which is portrait format 3.7" 480x640 including a touchscreen, but is a lot more expensive.
There is also a higher resolution 4.3" at 800x480 that is being investigated.
CPU
Gumstix PXA270 CPU and I/O cards, dimensioned DXF specs
GSM Modem and optional GPS
GSMstix - Siemens MC75 GSM/EDGE and ublox Global Positioning System Module or Telit GM862 Module
Codec
NXP UCB1400 audio CODEC with integrated touch screen controller and power management monitor
WiFi/Bluetooth
Embeddedworks Infineon Embedded Bluetooth 2 802.11b/g module
Accelerometer
Freescale MMA7260QT ?
Battery
many options, but one high capacity possibility is 1700mAh from Treo 700

Work is in progress on this page, capturing all the specifications and URLs. --Adrian 04:12, 3 February 2007 (EST)