Open Microprocessor Module

From HBMobile
Revision as of 06:08, 26 February 2007 by Lyle (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Introduction
This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones.
Preliminary Wish List
PLEASE ADD YOUR SUGGESTIONS TO THE WISH LIST!
  • i.MX31 @ 532 MHz
  • 128 MB Mobile DDR SDRAM
  • 32 MB Mobile NOR Flash
  • Power management controller and reset generation
  • LiPoly recharger
  • Real time clock
  • Touch panel controller
  • Audio Codec
  • All power supplies (Core, memory, I/O, peripherals, backlight)
  • USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
  • Land grid array breaking out all i.MX31 signals.
Retrieved from "http://hbmobile.pronoiac.org/index.php?title=Open_Microprocessor_Module&oldid=1585"