Open Microprocessor Module

From HBMobile
Revision as of 23:58, 1 March 2007 by Lyle (talk | contribs)
Jump to navigationJump to search
Introduction
This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones. The module will be general purpose, and
Open Source
The Open Microprocessor Module will be an open source design and subject to licensing terms terms that are yet to be determined. Any suggestions? Write it here...
Preliminary Specification
PLEASE ADD YOUR SUGGESTIONS at the bottom!
  • i.MX31 @ 532 MHz
  • 128 MB Mobile DDR SDRAM (Micron, MT46H32M32LF)
  • 32 MB Mobile NOR Flash (Spansion, S29WS256N)
  • Power management controller and reset generation
  • LiPoly recharger (Linear Tech, LTC4076)
  • Real time clock
  • Touch panel controller
  • Audio Codec
  • All power supplies (Core, memory, I/O, peripherals, backlight)
  • USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
  • Land grid array breaking out all i.MX31 signals.
Datasheets
Will link to pdf datasheets here.
Dimensions
50mm x 35mm (an educated guess)