Uploads by Adrian
From HBMobile
Jump to navigationJump to searchThis special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 05:19, 29 March 2007 | Case37-STL-2.0.zip (file) |  |
269 KB | Printable STL files for version 2.0 of case | 1 |
| 23:08, 3 March 2007 | MyPhone1.jpg (file) |  |
13 KB | 1 | |
| 23:06, 3 March 2007 | MyPhone0.jpg (file) |  |
17 KB | 1 | |
| 08:20, 1 March 2007 | Components.zip (file) | |
18 KB | 2 | |
| 07:34, 1 March 2007 | Case37assembly.zip (file) | |
88 KB | Alibre format assembly model, zipped parts files, not including front/back of case parts that are provided separately. | 1 |
| 07:24, 1 March 2007 | Case37IGES.zip (file) | |
181 KB | Front and back model files exported to industry standard IGES format. | 1 |
| 07:22, 1 March 2007 | Case37alibre.zip (file) | |
207 KB | Case front and back in native format for Alibre parametric CAD package. | 1 |
| 01:11, 1 March 2007 | MyPhone37front.jpg (file) |  |
17 KB | 3 | |
| 01:10, 1 March 2007 | MyPhone37back.jpg (file) |  |
46 KB | 2 | |
| 01:03, 1 March 2007 | Case37.zip (file) | |
254 KB | Front and back 3.7" Portrait format LCD case designs in STL (Stereo Lithography) format ready for printing on a 3D printer. Two files zipped together. This case has no openings for buttons etc, they can be drilled or cut using a laser cutter. | 1 |
| 08:08, 2 February 2007 | Blackcasecomparison.jpg (file) |  |
54 KB | Case with regular mobile phone showing how big the LCD is. | 1 |
| 08:07, 2 February 2007 | Blackcase.jpg (file) |  |
77 KB | Case top, sitting on a pile of bits that were peeled off with some difficulty... | 1 |
| 17:44, 1 February 2007 | PrintingCase.jpg (file) |  |
41 KB | Printing in progress, support material is layed to form a flat base, and the initial layer of black ABS is going down, you can see the bezel cutout on the rearmost item. This time we printed flat, face down, since the textured surface may end up looking n | 1 |
| 17:25, 1 February 2007 | Finishedbezel.jpg (file) |  |
60 KB | 3D printer made it in the upright position with support material. We made two and left support material on one of them. The one lying flat is the final part. | 1 |
| 15:39, 31 January 2007 | Casebottom.zip (file) | |
108 KB | Zipped STL file for 3D printing | 1 |
| 15:37, 31 January 2007 | Casetop.zip (file) | |
610 KB | 1 | |
| 15:33, 31 January 2007 | Casebottom.jpg (file) |  |
36 KB | 1 | |
| 15:32, 31 January 2007 | Casetop.jpg (file) |  |
42 KB | 1 | |
| 17:13, 30 January 2007 | Bezel.jpg (file) |  |
29 KB | 1 |
