MyPhone

myPhone is a TuxPhone

The TuxPhone proved the basic concept of a completely open phone (COP) with open software and open hardware, with all specifications of all the components freely available.

Software

See the open mobile software page.

OpenCell

OpenCell is being built by a team at Florida Tech, and we are sharing ideas and encouragement. They have published circuit schematics.

myPhone can be built from the following components, in any combination, landscape or portrait oriented screen.

Case

a customizable case that can be produced on a 3D printer. A first attempt at a bezel and an initial myPhone case for a 4.3" LCD have been designed using Alibre Express and printed at Techshop. Next step is a portrait oriented case for a 3.7" LCD with more rounded styling.

LCD Touch Screen

Sharp 4.3" 480x272 pixels as used in the Sony PSP, with a Hantouch touchscreen overlay added. This LCD has deeper color resolution than most, a true 8bits/pixel rather than 6bits for many others, but has relatively low pixel resolution. It's a low cost option, that needs more complex interfacing circuitry.

There is also a higher resolution 4.3" at 800x480 with integrated touchscreen that is being investigated.

OpenCell and the portrait oriented myPhone are using a Sharp 3.7" 480x640 pixels which is portrait format with integrated touchscreen.

CPU

Gumstix PXA270 600MHz CPU and I/O cards, dimensioned DXF specs

Freescale i.MX31 is another option that includes graphics/multimedia processing, more open documentation than the later models in the PXA series, and could be the basis of a more compact custom design.

GSM Modem and optional GPS

GSMstix - Siemens MC75 GSM/EDGE and ublox Global Positioning System Module or Telit GM862 Module or the Telit GM862-GPS. GSM Antenna. GPS Antenna specification.

Codec

NXP UCB1400 audio CODEC with integrated touch screen controller and power management monitor

WiFi/Bluetooth

Still researching the best options.

Bluetooth keyboard for people who want more than a touchscreen for input.

the Bluetooth Frogpad for one handed typing.

Thinkoutside/iGo makes a Stowaway "universal" Bluetooth folding keyboard.

Accelerometer

Freescale MMA7260QT ?

Camera

It would be nice to have a front mounted camera option for people who want to build video-phones.

Video-out

A TV-compatible video out feature would also be useful for presentations and projectors.

Battery

many options, but one high capacity, low cost, easily available possibility is 51x39x9mm Treo 650/700 3184WW 1800mAh.

A higher capacity option in the Treo form factor is 2400mAh

Work is in progress on this page, capturing all the specifications and URLs. --Adrian 05:08, 26 February 2007 (EST)

More information about generic hardware avaliable to build other phones is avaliable on the Hardware page - This is also work in progress :-).

Open Microprocessor Module

An Open Microprocessor Module design based on the Freescale i.MX31 has been started, and may serve as the basis for a broad range of potential mobile devices including MyPhone.