Open Microprocessor Module: Difference between revisions

From HBMobile
Jump to navigationJump to search
No edit summary
No edit summary
Line 1: Line 1:
; Introduction
; Introduction
: This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones.
: This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones. The module will be general purpose, and


; Open Source
; Open Source
: The Open Microprocessor Module will be an open source design and subject to licensing terms terms that are yet to be determined.  Perhaps GPL or Attribution-2.5.
: The Open Microprocessor Module will be an open source design and subject to licensing terms terms that are yet to be determined.  Any suggestions? Write it here...


; Preliminary Wish List
; Preliminary Specification
: PLEASE ADD YOUR SUGGESTIONS TO THE WISH LIST!
: PLEASE ADD YOUR SUGGESTIONS at the bottom!
:* i.MX31 @ 532 MHz
:* i.MX31 @ 532 MHz
:* 128 MB Mobile DDR SDRAM
:* 128 MB Mobile DDR SDRAM (Micron, MT46H32M32LF)
:* 32 MB Mobile NOR Flash
:* 32 MB Mobile NOR Flash (Spansion, S29WS256N)
:* Power management controller and reset generation
:* Power management controller and reset generation
:* LiPoly recharger
:* LiPoly recharger (Linear Tech, LTC4076)
:* Real time clock
:* Real time clock
:* Touch panel controller
:* Touch panel controller
Line 18: Line 18:
:* USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
:* USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
:* Land grid array breaking out all i.MX31 signals.
:* Land grid array breaking out all i.MX31 signals.
; Datasheets
: Will link to pdf datasheets here.
; Dimensions
: 50mm x 35mm (an educated guess)

Revision as of 23:58, 1 March 2007

Introduction
This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones. The module will be general purpose, and
Open Source
The Open Microprocessor Module will be an open source design and subject to licensing terms terms that are yet to be determined. Any suggestions? Write it here...
Preliminary Specification
PLEASE ADD YOUR SUGGESTIONS at the bottom!
  • i.MX31 @ 532 MHz
  • 128 MB Mobile DDR SDRAM (Micron, MT46H32M32LF)
  • 32 MB Mobile NOR Flash (Spansion, S29WS256N)
  • Power management controller and reset generation
  • LiPoly recharger (Linear Tech, LTC4076)
  • Real time clock
  • Touch panel controller
  • Audio Codec
  • All power supplies (Core, memory, I/O, peripherals, backlight)
  • USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
  • Land grid array breaking out all i.MX31 signals.
Datasheets
Will link to pdf datasheets here.
Dimensions
50mm x 35mm (an educated guess)