Open Microprocessor Module
From HBMobile
Jump to navigationJump to search
- Introduction
- This page will capture the information pertaining to the design of an Open Microprocessor Module for home brew mobile phones.
- Open Source
- The Open Microprocessor Module will be a completely open source design and subject to the GPL.
- Preliminary Wish List
- PLEASE ADD YOUR SUGGESTIONS TO THE WISH LIST!
- i.MX31 @ 532 MHz
- 128 MB Mobile DDR SDRAM
- 32 MB Mobile NOR Flash
- Power management controller and reset generation
- LiPoly recharger
- Real time clock
- Touch panel controller
- Audio Codec
- All power supplies (Core, memory, I/O, peripherals, backlight)
- USB Physicial Layer (USB 2.0 HS controller is on the i.MX31)
- Land grid array breaking out all i.MX31 signals.
